Asus Z97-Deluxe/USB 3.1 User Manual Download Page 173

Page: 173 / 184

ASUS Z97-DELUXE/USB 3.1

5-3

Chapter 5

5.1.4 Intel

Rapid Storage Technology Option ROM utility

To enter the Intel

Rapid Storage Technology Option ROM utility:

Turn on the system.

During POST, press <Ctrl> + <I> to display the utility main menu.

The navigation keys at the bottom of the screen allow you to move through the menus

and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not

exactly match the items on your screen.

The utility supports maximum four hard disk drives for RAID configuration.

RAID Volumes:

None defined.

Physical Devices:

Port Device Model Serial #

Size

Type/Status(Vol ID)

0 ST3160812AS 9LS0HJA4

149.0GB

Non-RAID Disk

1 ST3160812AS 9LS0F4HL

149.0GB

Non-RAID Disk

2 ST3160812AS 3LS0JYL8

149.0GB

Non-RAID Disk

3 ST3160812AS 9LS0BJ5H

149.0GB

Non-RAID Disk

Summary of Contents for Z97-Deluxe/USB 3.1

























































































































































































Search results

Summary of Contents for Z97-Deluxe/USB 3.1

Reviews:

Asus Z97-Deluxe/USB 3.1, User Manual, Page: 173 / 184

Search results

Summary of Contents for Z97-Deluxe/USB 3.1

Reviews: