Asus Z87-PRO V EDITION Manual Download Page 113

Page: 113 / 172

ASUS Z87-PRO (V EDITION)

3-33

Chapter 3

3.6.5

USB Configuration

The items in this menu allow you to change the USB-related features.

The

USB Devices

item shows the auto-detected values. If no USB device is detected, the

item shows

None

Legacy USB Support [Enabled]

[Enabled]

Enables the support for USB devices on legacy operating systems (OS).

[Disabled]

The USB devices can be used only for the BIOS setup program. It cannot

be recognized in boot devices list.

[Auto]

Allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is

detected, the legacy USB support is disabled.

Intel xHCI Mode [Smart Auto]

[Auto]

Keeps the last operation of xHCI controller in OS during bootup.

[Smart Auto]

Enables the operation of xHCI controller.

[Enabled]

Enables the xHCI controller.

[Disabled]

Disables the xHCI controller.

EHCI Hand-off [Disabled]

[Enabled]

Enables the support for operating systems without an EHCI hand-off

feature.

[Disabled]

Disables the EHCI Hand-off support.

Mass Storage Devices [Auto]

Allows the system to detect the devices according to their media formats.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]

USB Single Port Control

Allows you to enable or disable the individual USB port.

Refer to section

1.2.2 Motherboard layout

for the location of the USB ports.

Summary of Contents for Z87-PRO V EDITION













































































































































































Search results

Summary of Contents for Z87-PRO V EDITION

Reviews:

Related manuals for Z87-PRO V EDITION

Brands by name

Popular brands

Asus Z87-PRO V EDITION, Manual

Search results

Summary of Contents for Z87-PRO V EDITION

Reviews:

Related manuals for Z87-PRO V EDITION

Brands by name

Popular brands