Spin Up Device [Disabled]
Allow you to enable/disable the spin up device feature. Configuration options: [Disabled]
[Enabled]
SATA Device Type [Hard Disk Drive]
Allow you to identify the installed SATA device type. Configuration options: [Hard Disk Drive]
[Solid State Drive]
Typology [Unknown]
This item allows you to identify the SATA topology. Configuration options: [Unknown] [M2]
[Direct Connect] [ISATA] [Flex] [Optical Disk Drive]
Device Sleep [Disabled]
This item allows you to enable or disable device sleep. Configuration options: [Disabled]
[Enabled]
SATA DEVSLEP Idle Timeout Config [Disabled]
This item allows you to enable or disable SATA DTIO Configuration. Configuration options:
[Disabled] [Enabled]
2.6.6
USB Configuration
The items in this menu allow you to change the USB-related features.
The
USB Devices
item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
Your system supports the USB devices in legacy operating systems.
[Disabled]
Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
[Auto]
Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
XHCI Hand-off [Disabled]
[Enabled]
Enables the support for operating systems without an XHCI hand-off
feature.
[Disabled]
Disables the XHCI Hand-off support.
USB single port control
The subitems in this menu allow you to set the USB Port Disable Override features.
USB3_1~8 [Enabled]
Allows you to enable or disable the USB3.0 ports individually. Configuration options:
[Disabled] [Enabled]
USB9~14 [Enabled]
Allows you to enable or disable the USB2.0 ports individually. Configuration options:
[Disabled] [Enabled]
ASUS Z170-K
2-33