Asus Z170-AR Manual Download Page 43

Page: 43 / 130

ASUS Z170-AR Series

1-31

12. USB 3.0 connectors (20-1 pin USB3_12, USB3_34)

This connector allows you to connect a USB 3.0 module for additional USB 3.0 front

or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of

USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster charging time for

USB-chargeable devices, optimized power efficiency, and backward compatibility with

USB 2.0.

The USB 3.0 module is purchased separately.

•

These connectors are based on xHCI specification. We recommend you to install the

related driver to fully use the USB 3.0 ports under Windows

•

The plugged USB 3.0 device will run on xHCI mode.

•

These USB 3.0 ports support native UASP transfer standard in Windows

8 /

Windows

8.1 and Turbo Mode when using USB 3.0 Boost feature.

Summary of Contents for Z170-AR



































































































































Search results

Summary of Contents for Z170-AR

Reviews:

Related manuals for Z170-AR

Brands by name

Popular brands

Asus Z170-AR, Manual

Search results

Summary of Contents for Z170-AR

Reviews:

Related manuals for Z170-AR

Brands by name

Popular brands