Asus Z10PC-D8 Series User Manual Download Page 197

Page: 197 / 228

ASUS Z10PC-D8 Series

6-5

3. Select

Yes

using the <Tab> key when asked if you have the driver disk, then press

<Enter>.

Main Menu

Do you have a driver disk?

Yes

Insert the Red Hat

Enterprise RAID driver disk to the USB floppy disk drive, select

, then press <Enter>.

The drivers for the RAID card are installed to the system.

Insert Driver Disk

Back

Insert your driver disk into /dev/fd0

and press “OK” to continue.

Red Hat

Enterprise Linux OS 5.x

To load the LSI MegaRAID controller driver when installing Red Hat

Enterprise OS:

Boot the system from the Red Hat

OS installation CD.

At the

boot:

, type

linux dd

then press <Enter>.

- To install or upgrade in graphical mode, press the <ENTER> key.

- To install or upgrade in text mode, type: linux text <ENTER>.

- Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]

boot: linux dd

Summary of Contents for Z10PC-D8 Series





































































































































































































































Search results

Summary of Contents for Z10PC-D8 Series

Reviews:

Asus Z10PC-D8 Series, User Manual, Page: 197 / 228

Search results

Summary of Contents for Z10PC-D8 Series

Reviews: