Chapter 6 - Appendix
ASUS WLAN Card
71
FCC Radio Frequency Interference Requirements
MPE Statement:
Your device contains a low power transmitter, When device is
transmitted it sends out Radio Frequency (RF) signal.
This device is restricted to INDOOR USE due to its operation in the 5.15 to 5.25
GHz frequency range. FCC requires this product to be used indoors for the
frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel of the Mobile Satellite Systems.
High power radars are allocated as primary user of t he 5.25 to 5.35 GHz and 5.65
to 5.85 GHz. These radar stations can cause interference with and / or damage
this device.
FCC RF Exposure Guidelines (Access Points)
This Wireless LAN radio device has been evaluated under FCC Bulletin OET
65C and found compliant to the requirements as set forth in CFR 47 Sections
2.1091, 2.1093, and 15.247(b)(4) addressing RF Exposure from radio frequency
devices. This radiation output power of this Wireless LAN device is far below
the FCC radio frequency exposure limits, nevertheless, this device shall be used
in such a manner that the potential for human contact during normal operation –
as a mobile or portable device but use in a body-worn way is strictly prohibit.
When using this device, a certain separation distance between antenna and
nearby persons has to be kept to ensure RF exposure compliance. In order to
comply with the RF exposure limits established in the ANSI C95.1 standards,
access point equipment should be installed and operated with minimum distance
[20cm] betwe en the radiator and your body. Use only with supplied antenna.
Unauthorized antenna, modification, or attachments could damage the
transmitter and may violate FCC regulations.
CAUTION: Any changes or modifications not expressly approved in this
manual could void your authorization to use this device.
CAUTION: This device and its antenna(s) must not be co-located or
operating in conjunction with any other antenna or transmitter.
