2-2
Chapter 2: Setup
2.3
Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of the VW202/VW222 Series LCD monitor is specially
designed for VESA wall mount.
To detach the arm/base:
.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes (Figure ).
3.
Use a screwdriver to remove the two screws on the arm (Figure ), then slide
out the arm/base to detach it from the monitor (Figure 2).
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Arm/base
Rubbers in the
screw holes
Two screws
Figure 1
Figure 2
Summary of Contents for VW202 Series
Page 1: ...VW202 VW222 Series LCD Monitor User Guide ...
Page 12: ...1 Chapter 1 Product introduction ...
Page 16: ...2 Chapter 2 Setup ...
