VivoPC Barebone
27
Installing storage devices
You can install two 2.5-inch HDDs or SSDs (via the Vivo DualBay
adapter) or one 3.5-inch HDD as storage device for your VivoPC
barebone.
NOTE:
The Vivo DualBay adapter in this manual is for reference only.
Installing 2.5-inch HDDs/SSDs
IMPORTANT:
Ensure to turn off your VivoPC and disconnect all cables
and peripherals before installing any device or components.
To install 2.5-inch HDDs/SSDs to the Vivo DualBay adapter:
1. Place the VivoPC on a stable and flat surface.
2. Press down the latch at the rear panel to release the top cover
of the VivoPC.
3. Slide the top cover towards the rear of VivoPC until it is
detached from the chassis.
Summary of Contents for VivoPC VC62B
