2 - 1 5
2 - 1 5
2 - 1 5
2 - 1 5
2 - 1 5
A S U S V i n t a g e - A H 1
A S U S V i n t a g e - A H 1
A S U S V i n t a g e - A H 1
A S U S V i n t a g e - A H 1
A S U S V i n t a g e - A H 1
8.
Connect the other end of the IDE ribbon cable to the secondary IDE
connector (labeled SEC_IDE) on the motherboard. See page 4-6 for
the location of this connector.
9.
Connect the other end of the audio cable to the black 4-pin connector
labeled CD on the motherboard. See page 4-9 for the location of this
connector.
10. Remove the dummy drive slot cover from the front panel.
4
4
3
10. Replace the front panel. Refer to section “2.11 Replacing the side
plates and front cover” on page 2-20 for details.
