background image

ASUS V-series M4A3000E

4-9

4.2.4.

Menu.items

The highlighted item on the menu bar  displays 

the specific items for that menu. For example, 

selecting Main shows the Main menu items.
The other items (Advanced, Power, Boot, 

Tools, and Exit) on the menu bar have their 

respective menu items.

4.2.5.

Sub-menu.items

A solid triangle before each item on any menu screen means that the iteam has a 

sub-menu. To display the sub-menu, select the item and press <Enter>.

4.2.6 

Configuration fields

These fields show the values for the menu items. If an item is user- configurable, 

you can change the value of the field opposite the item. You cannot select an item 

that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To 

change the value of a field, select it then press <Enter> to display a list of options. 

Refer to “2.2.7 Pop-up window.”

4.2.7.

Pop-up.window

Select a menu item then press 

<Enter> to display a pop-up 

window with the configuration 

options for that item.

4.2.8.

Scroll.bar

A scroll bar appears on the right 

side of a menu screen when 

there are items that do not fit on 

the screen. Press the  

Up/Down arrow keys or <Page 

Up> /<Page Down> keys to display the other items on the screen.

4.2.9.

General.help

At the top right corner of the menu screen is a brief description of the selected 

item.

 

 

 

 

 

 

 

 

   

                                                 

                   

 

 

   

 

    

 

 

      Select Screen

      Select Item

Enter Go to Sub-screen

F1    General Help

F10   Save and Exit

ESC   Exit

Main.menu.items

   Select Screen

    Select Item

+-

   Change Field

Tab   Select Field

F1   General Help

F10   Save and Exit

ESC   Exit

v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.

BIOS SETUP UTILITY

Main     Advanced     

Power

     Boot    Tools     Exit 

Use [ENTER], [TAB]

or [SHIFT-TAB] to 

select a field.

Use [+] or [-] to

configure system 

Time.

Suspend Mode

 

[Auto]

ACPI 2.0 Support 

[Disabled] 

ACOU AOUC suport 

[Enabled] 

 

 

  APM Configuration

  Hardware Monitor

Options

S1 (POS) only

S3 only

Auto

Pop-up.window

Summary of Contents for V6-M4A3000E






















































































Reviews: