Asus V*-P5G45 Series Page 78 Installation Manual Download

Page: 78 / 120

5-2

Chapter 5: BIOS setup

5.1

Managing and updating your BIOS

The following utilities allow you to manage and update the motherboard Basic

Input/Output System (BIOS) setup.
1.

ASUS.Update

(Updates the BIOS in Windows

environment.)

ASUS.EZ.Flash.2

(Updates the BIOS using a floppy disk or USB flash disk.)

ASUS.AFUDOS

(Updates the BIOS using a bootable floppy disk.)

ASUS.CrashFree.BIOS.3

(Updates the BIOS using a bootable floppy disk,

USB flash disk or the motherboard support DVD when the BIOS file fails or

gets corrupted.)

Refer to the corresponding sections for details on these utilities.

Save a copy of the original motherboard BIOS file to a bootable floppy disk or

USB flash disk in case you need to restore the BIOS in the future. Copy the

original motherboard BIOS using the ASUS Update or AFUDOS utilities.

Installing.ASUS.Update

To install ASUS Update:
1. Place the support DVD in the optical drive. The Drivers menu appears.
2. Click the

Utilities

tab, then click

Install.ASUS.Update

3. The ASUS Update utility is copied to your system.

5.1.1.

ASUS.Update.utility

The ASUS Update is a utility that allows you to manage, save, and update the

motherboard BIOS in Windows

environment. The ASUS Update utility allows you

to:

•

Save the current BIOS file

•

Download the latest BIOS file from the Internet

•

Update the BIOS from an updated BIOS file

•

Update the BIOS directly from the Internet, and

•

View the BIOS version information.

This utility is available in the support DVD that comes with the motherboard

package.

ASUS Update requires an Internet connection either through a network or an

Internet Service Provider (ISP).

Summary of Contents for V*-P5G45 Series

























































































































Search results

Summary of Contents for V*-P5G45 Series

Reviews:

Related manuals for V*-P5G45 Series

Brands by name

Popular brands

Asus V*-P5G45 Series, Installation Manual

Search results

Summary of Contents for V*-P5G45 Series

Reviews:

Related manuals for V*-P5G45 Series

Brands by name

Popular brands