Asus TW100-E5 - iQuadro - 0 MB RAM User Manual Download

Page: 34 / 136

Chapter 2: Hardware setup

2-16

2. Insert the drive into the 5.25-inch

drive bay.

2.6.2

Installing an additional 5.25-inch drive

To install an additional 5.25-inch drive

1. Select the drive bay you intend to

use. Push the knock down metal

cover in and out of the chassis until

it is removed.

Take extra care when removing

the knock down metal cover.

Use tools such as a screw driver

to bend and remove the metal

cover to avoid physical injury.

4. Pull and swing the left edge of the

front panel cover outward.

5. Unhook the hinge-like tabs from

the holes on the right side of the

chassis to completely detach the

front panel cover from the chassis.

Do not use too much force when

removing the front panel cover.

Summary of Contents for TW100-E5 - iQuadro - 0 MB RAM









































































































































Search results

Summary of Contents for TW100-E5 - iQuadro - 0 MB RAM

Reviews:

Related manuals for TW100-E5 - iQuadro - 0 MB RAM

Brands by name

Popular brands

Asus TW100-E5 - iQuadro - 0 MB RAM, User Manual

Search results

Summary of Contents for TW100-E5 - iQuadro - 0 MB RAM

Reviews:

Related manuals for TW100-E5 - iQuadro - 0 MB RAM

Brands by name

Popular brands