manualshive.com logo in svg

Asus TUV4X, User Manual, Page: 7 / 94

Share
Download
Asus TUV4X User Manual Download Page 7

ASUS TUV4X User’s Manual

7

1.1 How This Manual Is Organized

This manual is divided into the following sections:

1. INTRODUCTION

Manual information and checklist

2. FEATURES

Production information and specifications

3. HARDWARE SETUP

Instructions on setting up the motherboard.

4. BIOS SETUP

Instructions on setting up the BIOS

5. SOFTWARE SETUP

Instructions on setting up the included software

6. SOFTWARE REFERENCE

Reference material for the included software

7. APPENDIX

Optional items and general reference

1.2 Item Checklist

Check that your package is complete. If you discover damaged or missing items,
contact your retailer.

1.  INTRODUCTION

1. INTRODUCTION

Manual / Checklist

Package Contents

(1) ASUS Motherboard

(1) 40-pin 80-conductor ribbon

cable for internal UltraDMA/66
or UltraDMA/33 IDE drives

(1) Ribbon cable for two 3.5”

floppy disk drives

(1) ASUS Support CD with drivers

and utilities

(1) Bag of spare jumper caps

(1) ASUS 2-port USB Connector

Set

(1) User’s Manual

Optional Items

ASUS Modem MR

ASUS IrDA-compliant infrared
module

ASUS PCI-L101 Wake-On-LAN

10/100 Ethernet Card

Summary of Contents for TUV4X































































































Reviews:

No comments