1-6
Chapter 1: Product introduction
To configure a 7.1-channel audio output:
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
7.
USB 3.1 Gen 2 (up to 10Gbps) ports (teal blue, Type A)
. These 9-pin Universal
Serial Bus 3.1 (USB 3.1) Gen 2 ports are for USB 3.1 Gen 2 devices.
•
USB 3.1 Gen 2 / Gen 1 devices can only be used for data storage.
•
Due to the design of the Intel
®
300 series chipset, all USB devices connected to the
USB 2.0 and USB 3.1 Gen 2 / Gen 1 ports are controlled by the xHCI controller. Some
legacy USB devices must update their firmware for better compatibility.
•
We strongly recommend that you connect USB 3.1 Gen 2 devices to USB 3.1 Gen 2
ports for faster and better performance from your USB 3.1 Gen 2 devices.
8.
USB 5Gb/s Type C port
. This 24-pin Universal Serial Bus (USB) port is for USB (Type
C) devices.
9.
HDMI port.
This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
10. USB 2.0 ports.
These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Headset
2.1-channel
4.1-channel
5.1-channel
7.1-channel
Light Blue (Rear panel)
Line In
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Lime (Rear panel)
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink (Rear panel)
Mic In
Mic In
Bass/Center
Bass/Center
Lime (Front panel)
-
-
-
Side Speaker Out
