Asus Terminator 1 A7VT User Manual Download Page 59

Page: 59 / 98

ASUS Terminator T1 A7VT barebone system

Floppy disk drive connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After
connecting one end to the motherboard, connect the other end to the
floppy drive. (Pin 5 is removed to prevent incorrect insertion when
using ribbon cables with pin 5 plug).

A7VT

A7VT Floppy disk drive connector

FLOPPY

NOTE:

Orient the red markings on

the floppy ribbon cable to PIN 1.

Internal audio connectors (4-pin AUX, CD)

These connectors allow you to receive stereo audio input from sound
sources such as an optical drive, TV tuner, or MPEG card.

A7VT

A7VT Internal audio connectors

AUX (White)

Right Audio Channel

Left Audio Channel

Ground

CD (Black)

Right A

udio Channel

Left A

udio Channel

Ground

Summary of Contents for Terminator 1 A7VT



































































































Search results

Summary of Contents for Terminator 1 A7VT

Reviews:

Related manuals for Terminator 1 A7VT

Brands by name

Popular brands

Asus Terminator 1 A7VT, User Manual

Search results

Summary of Contents for Terminator 1 A7VT

Reviews:

Related manuals for Terminator 1 A7VT

Brands by name

Popular brands