Asus T Series, Instruction Manual

Page: 7 / 56

7 Installation manual
English
Installing an expansion card
1. Locate and remove one metal bracket lock screw.
. Remove the metal bracket lock.
3. Align the card connector with the slot, then press firmly.
4. Secure the card with one screw.
5. Replace the metal braket lock, then secure it with one screw.
Installing a hard disk drive
1. Connect the SATA/IDE power cable to the
plug of the power supply unit.
. Connect the SATA/IDE (A) and power (B)
plugs to the connectors at the back of the
SATA/IDE hard disk drives.
3. Locate the HDD tray.
4. Insert a hard disk drive (with the HDD PCB
facing the top of the chassis) to the tray,
then secure it with four screws.
5. Connect the SATA/IDE signal cable to the
SATA/IDE connector on the motherboard, and
tighten all the cables with the plastic coils.
1
3
4
5
1
4
4
SATA
IDE
A
B
A
B