Asus T-P5P43 User Manual Download Page 85

Page: 85 / 108

5-19

ASUS T-P5P43

5.4.1

CPU Configuration

The items in this menu show the CPU-related information that the BIOS

automatically detects.

Configure advanced CPU settings

Module Version: 3D.0E

Manufacturer: Intel

Brand String: Inter(R) Core(TM)2 CPU 6300 @ 1.86GHz

Frequency : 1.86GHz

FSB Speed : 1066MHz

Cache L1 : 64 KB

Cache L2 : 2048 KB

Ratio Status: Unlocked (Min:06, Max:07)

Ratio Actual Value: 7

CPUID : 6F2

CPU Ratio Setting

[Auto]

C1E Support

[Enabled]

Max CPUID Value Limit:

[Disabled]

Intel(R) Virtualization Tech

[Enabled]

CPU TM function:

[Enabled]

Execute Disable Bit

[Enabled]

Intel(R) SpeedStep(tm) tech.

[Enabled]

Sets the ratio

between CPU Core

Clock and the FSB

Frequency.

NOTE: If an invalid

ratio is set in CMOS

then actual and

setpoint values may

differ.

CPU Ratio Setting [Auto]

Allows you to adjust the ratio between the CPU Core Clock and the FSB

Frequency. Configuration options: [Auto]

C1E Support [Enabled]

Allows you to enable or disable Inter CPU Enhanced Halt (C1E) function, a CPU power-

saving function in system halt state. When enable, the CPU core frequency and voltage will

be reduced during the system halt state to decrease power consumption.

Configuration options: [Disabled] [Enabled]

Max CPUID Value Limit [Disabled]

Allows you to determine whether to limit CPUID maximum value. Set this item to

[Disabled] for Windows XP operating system; set this item to [Enabled] for legacy

operating system such as Windows NT4.0. (Default: Disabled)

Configuration options: [Disabled] [Enabled]

If you need to adjust the ratio manualy, key in the number directly.

Summary of Contents for T-P5P43













































































































Search results

Summary of Contents for T-P5P43

Reviews:

Related manuals for T-P5P43

Brands by name

Popular brands

Asus T-P5P43, User Manual

Search results

Summary of Contents for T-P5P43

Reviews:

Related manuals for T-P5P43

Brands by name

Popular brands