Asus SABERTOOTH X58 Manual Download Page 122

Page: 122 / 128

5-6

Chapter 5: Multiple GPU technology support

Chapter 5

5.2

NVIDIA

SLI™ technology

The motherboard supports the NVIDIA

SLI™ (Scalable Link Interface) technology that

allows you to install multi-graphics processing units (GPU) graphics cards. Follow the

installation procedures in this section.

5.2.1

Requirements

•

In SLI mode, you should have two identical SLI-ready graphics cards that are NVIDIA

certified.

•

Ensure that your graphics card driver supports the NVIDIA SLI technology. Download

the latest driver from the NVIDIA website (www.nvidia.com).

•

Ensure that your power supply unit (PSU) can provide at least the minimum power

required by your system. See Chapter 2 for details.

5.2.2

Installing two SLI-ready graphics cards

The following pictures are for reference only. The graphics cards and the motherboard

layout may vary with models, but the installation steps remain the same.

1. Prepare two SLI-ready graphics cards.
2.

Insert the two graphics card into the

PCIEX16 slots. If your motherboard

has more than two PCIEX16 slots,

refer to Chapter 2 in this user manual

for the locations of the PCIEX16 slots

recommended for multi-graphics card

installation.

Ensure that the cards are properly seated

on the slots.

•

We recommend that you install additional chassis fans for better thermal environment.

•

Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics

card and supported 3D application list.

Summary of Contents for SABERTOOTH X58

































































































































Search results

Summary of Contents for SABERTOOTH X58

Reviews:

Related manuals for SABERTOOTH X58

Brands by name

Popular brands

Asus SABERTOOTH X58, Manual

Search results

Summary of Contents for SABERTOOTH X58

Reviews:

Related manuals for SABERTOOTH X58

Brands by name

Popular brands