Asus SABERTOOTH 990FX/GEN3 R2.0 User Manual Download Page 144

Page: 144 / 184

4-26

Chapter 4: Software support

Chapter 4

Using History Record

Click

History Record

tab and adjust the settings on the left for

Record

Interval

and

Record Duration

according to need.

Click

Start

Recording

to start measuring and recording each sensor.

To stop recording, click

Recording

again.

To track the recorded contents, set

Type

Date

Select display items

to display the

history details.

Click

Monitor

> Sensor

on the AI Suite II main menu bar and the system status will appear

on the right panel.

Summary of Contents for SABERTOOTH 990FX/GEN3 R2.0

























































































































































































Search results

Summary of Contents for SABERTOOTH 990FX/GEN3 R2.0

Reviews:

Related manuals for SABERTOOTH 990FX/GEN3 R2.0

Brands by name

Popular brands

Asus SABERTOOTH 990FX/GEN3 R2.0, User Manual

Search results

Summary of Contents for SABERTOOTH 990FX/GEN3 R2.0

Reviews:

Related manuals for SABERTOOTH 990FX/GEN3 R2.0

Brands by name

Popular brands