manualshive.com logo in svg

Asus RS720A-E9-RS24-E, User Manual, Page: 146 / 162

Share
Download
Asus RS720A-E9-RS24-E User Manual Download Page 146

6-2

Chapter 6: Driver Installation

6.1 

Management applications and utilities installation

When you place the support DVD into the optical drive, the DVD automatically displays the 

main screen if Autorun is enabled in your computer. By default, the Drivers tab is displayed.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to 

locate the file 

ASSETUP.EXE

 from the 

BIN

 folder. Double-click the 

ASSETUP.EXE

 to run 

the support DVD.

1.  The contents of the support DVD are subject to change at any time without notice. 

Visit the ASUS website (www.asus.com) for the latest updates on software and 

utilities.

2.  The support DVD is supported on Windows

®

 Server 2012 R2 and Windows

®

 Server 

2016.

The support DVD that is bundled with your motherboard contains drivers, management 

applications, and utilities that you can install to maximize the features of your motherboard.

The main screen of the Support DVD contains the following tabs:

1. Drivers

2. Utilities

3. Manual

4. Contact

The main screen of the Support DVD looks exactly the same on the Windows

®

 Server 2012 

R2 and on the Windows

®

 Server 2016 Operating System (OS).

6.2 

Running the Support DVD

Summary of Contents for RS720A-E9-RS24-E



































































































































































Reviews:

No comments