Asus RS720-E9-RS8 User Manual Download Page 178

Page: 178 / 200

6-20

Chapter 6: RAID Configuration

When the

Strip Size

item is selected, press <Enter> to select strip size for the RAID

array (for RAID 0, 10 and 5 only), and then press <Enter>. The available strip size

values range from 4 KB to 128 KB. The following are typical values:

RAID 0: 128 KB

RAID 10: 64 KB

RAID 5: 64 KB

We recommend a lower strip size for server systems, and a higher strip size for multimedia

computer systems used mainly for audio and video editing.

When the

Capacity (MB)

item is selected, enter the RAID volume capacity that you

want and press <Enter>. The default value indicates the maximum allowed capacity.

When the

Create Volume

item is selected, press <Enter> to create the RAID volume

and return to the Intel

Rapid Storage Technology menu.

6.4.2

Deleting a RAID set

Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when

you delete a RAID set.

To delete a RAID set:

From the Intel

Virtual Raid on CPU menu, select the RAID volume you want to delete

and press <Enter>. The following screen appears:

When the

Delete

item is selected, press <Enter>, then select

Yes

to delete the RAID

volume and return to the Intel

Virtual Raid on CPU menu, or select

to cancel.

Summary of Contents for RS720-E9-RS8









































































































































































































Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands

Asus RS720-E9-RS8, User Manual

Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands