manualshive.com logo in svg

Asus RS720-E9-RS24-U, User Manual

Share
Download
Asus RS720-E9-RS24-U User Manual Download Page 143

5-41

ASUS RS720-E9-RS24-U

User Password

To set a user password:

1. 

Select the User Password item and press <Enter>.

2. 

From the Create New Password box, key in a password, then press <Enter>.

3. 

Confirm the password when prompted.

To change a user password:

1. 

Select the User Password item and press <Enter>.

2. 

From the Enter Current Password box, key in the current password, then press 

<Enter>.

3. 

From the Create New Password box, key in a new password, then press <Enter>.

4. 

Confirm the password when prompted.

To clear a user password:

1. 

Select the Clear User Password item and press <Enter>.

2. Select 

Yes

 from the Warning message window then press <Enter>.

Secure Boot

This item allows you to customize the Secure Boot settings.

Secure Boot

Allows you to enable or disable Secure Boot. 

Configuration options: [Disabled] [Enabled]

Summary of Contents for RS720-E9-RS24-U



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands