Asus RS700D-E6 RS8 User Manual Download Page 142

Page: 142 / 164

7-8

Chapter 7: Driver installation

Red Hat

Enterprise Linux OS 4.7/4.8

To install the RAID controller driver when installing Red Hat

Red Hat

Enterprise OS:

1. Boot the system from the Red Hat

OS installation CD.

2. At the

boot:

, type

linux dd nostorage

3. Press <Enter>.

- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]

boot: linux dd nostorage

4. Select

Yes

using the <Tab> key when asked if you have the driver disk, then

press <Enter>.

Main Menu

Do you have a driver disk?

Yes

5. Press <Enter> to continue.

Insert Driver Disk

Insert your driver disk into /dev/sda

and press “OK” to continue.

Cancel

Summary of Contents for RS700D-E6 RS8





































































































































































Search results

Summary of Contents for RS700D-E6 RS8

Reviews:

Related manuals for RS700D-E6 RS8

Brands by name

Popular brands

Asus RS700D-E6 RS8, User Manual

Search results

Summary of Contents for RS700D-E6 RS8

Reviews:

Related manuals for RS700D-E6 RS8

Brands by name

Popular brands