Asus RS500A-E10 Series User Manual Download Page 83

Page: 83 / 146

ASUS RS500A-E10 Series

4-13

LAN Activity LED connector (5-1 pin LAN34_LED1)

These leads are for 10G LAN activity LEDs on the front panel. Connect the LAN LED

cable to the backplane for LAN activity indication.

Front fan connectors (4-pin FRNT_FAN1-6)

The fan connectors support cooling fans. Connect the fan cables to the fan connectors

on the motherboard, ensuring that the black wire of each cable matches the ground pin

of the connector.

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components.

•

These are not jumpers! DO NOT place jumper caps on the fan connectors!

•

All fans feature the ASUS Smart Fan technology.

Summary of Contents for RS500A-E10 Series



















































































































































Search results

Summary of Contents for RS500A-E10 Series

Reviews:

Brands by name

Popular brands

Asus RS500A-E10 Series, User Manual

Search results

Summary of Contents for RS500A-E10 Series

Reviews:

Brands by name

Popular brands