Asus RS300-E8 Series, User Manual

Page: 32 / 160

Chapter 2: Hardware Information 2-12
2.5 Expansion slot
2.5.1 Installing an expansion card to the riser card bracket
The barebone server comes with a riser card bracket. You need to remove the bracket if you
want to install PCI Express x8 or x16 expansion cards.
To install a PCI Express x8 or x16 card:
2. Place the riser card bracket on a flat
and stable surface, then remove the
screw from the slot bay.
1. Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI Express x16 slot on the
motherboard.
4. Repeat the previous steps to install another PCI Express x8 or x16 card if needed.
3. Install a PCI Express x8 or x16 card
to the bracket as shown, then secure
the card with a screw.