Asus RS100-X7, User Manual, Page: 51 / 134

ASUS RS100-X7 4-7
4.3 Internal connectors
1. Serial ATA connectors
(SATA 6Gb/s: 7-pin SATA1, SATA2 [Blue])
(SATA 3Gb/s: 7-pin SATA3, SATA4, SATA5, SATA6 [Black])
Supported by the Intel
®
C204 chipset, these connectors are for the Serial ATA
signal cables for Serial ATA hard disk drives that allows up to 6Gb/s of data
transfer rate.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1,
RAID 10, or RAID 5 configuration.
2. Hard disk activity LED connector (4-pin HDLED1)
This LED connector is for the storage add-on card cable connected to
the SATA or SAS add-on card. The read or write activities of any device
connected to the SATA or SAS add-on card causes the front panel LED to
light up.
P8B-X/MR SATA connectors
P8B-X/MR
The actual data transfer rate depends on the speed of Serial ATA hard disks
installed.
P8B-X/MR Hard disk activity connector
P8B-X/MR