Asus ROG MAXIMUS XII APEX Manual Download Page 28

Page: 28 / 90

1-12

Chapter 1: Product Introduction

Chapter 1

M.2 slot

The M.2 slot allows you to M.2 SSD modules.

•

M.2_1 slot supportS PCIe 3.0 x4 mode Key M design and type 2242 / 2260/ 2280

storage devices.

•

M.2_1 shares bandwidth with PCIe x4 slot, when M.2_1 is populated with a x2

device, PCIe x4 slot will run at x1 mode, when M.2_1 is populated with a x4 device,

PCIe x4 slot will be disabled

• Intel

Optane Technology is supported by M.2_1 when sourced from the PCH.

Before using Intel

Optane memory modules, ensure that you have updated your

motherboard drivers and BIOS to the latest version from ASUS support website.

•

M.2 slot supports IRST (Intel

Rapid Storage Technology).

The M.2 SSD module is purchased separately.

Summary of Contents for ROG MAXIMUS XII APEX



























































































Search results

Summary of Contents for ROG MAXIMUS XII APEX

Reviews:

Related manuals for ROG MAXIMUS XII APEX

Brands by name

Popular brands

Asus ROG MAXIMUS XII APEX, Manual

Search results

Summary of Contents for ROG MAXIMUS XII APEX

Reviews:

Related manuals for ROG MAXIMUS XII APEX

Brands by name

Popular brands