Asus Q670EI-IM-A, Manual

Page: 37 / 59

3-3
Chapter 3: BIOS setup
• Be cautious when selecting AiO chassis. Incorrect selection of AiO chassis
can cause incorrect operation or potential damage to AiO chassis hardware.
• The following items appear only when you set
All-in-One Chassis
to
[None]
.
EDID Data Source
Configuration options: [Pre-Defined] [Flat Panel Display]
The following item appears when you set
EDID Data Source
to
[Pre-Defined]
.
LFP Panel Type
Allows you to select LFP panel used by Internal Graphics Device.
Configuration options: [VBIOS Default] [640x480] [800x600] [1024x768]
[1280x1024] [1400x1050 LVDS1] [1400x1050 LVDS2] [1600x1200]
[1366x768] [1680x1050] [1920x1200] [1440x900] [1600x900] [1024x768]
[1280x800] [1920x1080] [2048x1536]
Inverter Polarity
Configuration options: [Normal] [Inverted]
Channel Select
Configuration options: [Dual Channel] [Single Channel]
Mode Select
Confuguration options: [JEIDA] [VESA 6bit] [VESA 8bit] [VESA 10bit]
DIGON enable to LVDS_ON enable(T2)
Configuration options: [0] ~[50]
LVDS_ON enable to BLON enable (T3)
Configuration options: [0] ~[1023]
BLON disable to LVDS_ON disable (T4)
Configuration options: [0] ~[1023]
LVDS_ON disable to DIGON disbale (T5)
Configuration options: [0] ~[50]
Completion of power down to power up (T7)
Configuration options: [0] ~[1023]
VARY_BL enable to BL_EN enable (T9)
Configuration options: [0] ~[1023]
BL_EN disable to VARY_BL disable (T10)
Configuration options: [0] ~[1023]