16
PureGo User Manual
3. Rinse the bottom filter cover with clean water, then wipe it dry using a soft
cloth and reattach it to the PureGo.
4. After cleaning the PureGo, place the PureGo in clean water. Long press until the
LED ring lights up blue and perform a recalibration to make sure the PureGo
was properly cleaned.
5. The recalibration process is complete once the blue light turns off.
2. Wet a lens cleaning cloth or cotton swab with clean water, and clean both glass
sides of the optical detection chamber.
NOTE:
Use clean water to clean your PureGo. Do not use organic solvents (such as oil
removers or alcohol) or detergents.
