5 - 1 1
5 - 1 1
5 - 1 1
5 - 1 1
5 - 1 1
A S U S P u n d i t P 3 - P H 4
A S U S P u n d i t P 3 - P H 4
A S U S P u n d i t P 3 - P H 4
A S U S P u n d i t P 3 - P H 4
A S U S P u n d i t P 3 - P H 4
PIO Mode [Auto]
PIO Mode [Auto]
PIO Mode [Auto]
PIO Mode [Auto]
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
DMA Mode [Auto]
DMA Mode [Auto]
DMA Mode [Auto]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0]
[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] [UDMA6]
SMART Monitoring [Auto]
SMART Monitoring [Auto]
SMART Monitoring [Auto]
SMART Monitoring [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
32Bit Data Transfer [Disabled]
32Bit Data Transfer [Disabled]
32Bit Data Transfer [Disabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
5.3.4
5.3.4
5.3.4
5.3.4
5.3.4
IDE Configuration
IDE Configuration
IDE Configuration
IDE Configuration
IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press <Enter>
if you want to configure the item.
IDE Configuration
Configure SATA As
[Standard IDE]
Onboard IDE Operate Mode
[Enhanced Mode]
Enhanced Mode Support On
[S-ATA]
IDE Detect Time Out (Sec)
[35]
Configure SATA As [Standard IDE]
Configure SATA As [Standard IDE]
Configure SATA As [Standard IDE]
Configure SATA As [Standard IDE]
Configure SATA As [Standard IDE]
Sets the Serial ATA configuration. The default option [Standard IDE] allows
you to use your Serial ATA device like a Parallel ATA physical storage
interface.
Onboard IDE Operate Mode [Enhanced Mode]
Onboard IDE Operate Mode [Enhanced Mode]
Onboard IDE Operate Mode [Enhanced Mode]
Onboard IDE Operate Mode [Enhanced Mode]
Onboard IDE Operate Mode [Enhanced Mode]
Allows selection of the IDE operation mode depending on the operating
system (OS) that you installed. Set to Enhanced Mode if you are using
native OS, such as Windows
®
2000/XP. Configuration options: [Disabled]
[Compatible Mode] [Enhanced Mode]
Set SATA controller to
IDE mode.
