Asus PRIME Z390-P, Manual

Page: 56 / 88

Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.5.7 OC Tuner [Keep Current Settings]*
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance. It also accelerates the CPU graphics performance to
the extreme depending on the CPU graphics loading. Configuration options: [Keep Current
Settings] [OC Tuner I] [OC Tuner II]
Ensure that you installed an efficient CPU fan for CPU and graphics loading before
selecting either [OC Tuner I] or [OC Tuner II] . To keep the current overclocking tuner
status, select [Keep Current Settings] .
2.5.8 Power-saving & Performance Mode [Auto]
[Auto] Automatically adjusts the power usage based on the system load.
[Max Power-Saving Mode] Enables all power-saving settings for maximum energy-saving
condition.
[Performance Mode] Disables all power-saving settings for a high system performance.
2.5.9 DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.5.10 DIGI+ VRM
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel VRM specification and affects the CPU power voltage. The CPU
working voltage will decrease proportionally depending on the CPU loading. Higher levels of
the load-line calibration can get a higher voltage and a better overclocking performance but
increases the CPU and VRM thermal. Configuration options: [Auto][Level 1] [Level 2] ~ [Level
6] [Level 7]
The boosted performance may vary depending on the CPU specification. Do not remove
the thermal module.
Synch ACDC Loadline with VRM Loadline [Disabled]
Allows you to enable or disable synch ACDC loadline with VRM loadline. Configuration
options: [Disabled] [Enabled]
CPU Current Capability [Auto]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [Auto] [100%] [110%] [120%] [130%] ~ [170%]
2-22 Chapter 2: Getting started