Asus Prime Z370-P II, User Manual

Page: 63 / 80

ASUS PRIME Z370-P II
3-17
Chapter 3
SMART Self Test
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
SATA6G_1(Gray) - SATA6G_4(Gray)
SATA6G_1(Gray) - SATA6G_4(Gray)
This item allows you to enable or disable the selected SATA port. Configuration
options: [Disabled] [Enabled]
Hot Plug
These items appear only when the SATA Mode Selection is set to [
AHCI
] and allows
you to enable or disable SATA Hot Plug Support. Configuration options: [Disabled]
[Enabled]
3.6.6 PCH-FW Configuration
This item allows you to configure the firmware TPM.
SATA Mode Selection
This item allows you to set the SATA configuration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to
use the AHCI (Advanced Host Controller Interface). The
AHCI allows the onboard storage driver to enable advanced
Serial ATA features that increases storage performance
on random workloads by allowing the drive to internally
optimize the order of commands.
[ Intel RST Premium With
Intel Optane System
Acceleration(RAID)]
Set to [Intel RST Premium With Intel Optane System
Acceleration(RAID)] when you want to create a RAID
configuration from the SATA hard disk drives.
3.6.7 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller. Configuration options:
[Disabled] [Enabled]
LED Lighting
This item allows you to set the audio shielding LED mode. Configuration options: [Disabled]
[Still Mode] [Breathing Mode]
M.2_1 Configuration
[Auto] Automatically detects the M.2 device mode. If a SATA device is detected,
SATA6G_1 port will be disabled.
[SATA Mode] Supports M.2 SATA devices only. SATA6G_1 port will be disabled.
[PCIE Mode] Supports M.2 PCIe devices only.