ASUS PRIME H610M-F D4
1-1
Product Introduction
1
1.1
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
1.2
Motherboard overview
Place this
side towards
the rear of the
chassis
ATX_12V
PCIEX16(G4)
PCIEX1(G3)
SPEAKER
128Mb
BIOS
CLRTC
F_PANEL
USB78
COM_DEBUG
U32G1_12
AAFP
ATX_PWR
CPU_FAN
BATTERY
CHA_FAN
Super
I/O
22.6cm(8.9in)
DDR4 DIMM_A1 (64bit, 288-pin module)
2280
2260
2242
DDR4 DIMM_B1 (64bit, 288-pin module)
AUDIO
KBMS
VGA
LAN_USB_56
U32G1_34
USB914
19.3cm(7.6in)
SATA6G_2
SATA6G_3
SATA6G_4
SATA6G_1
Intel
®
H610
M.2(SOCKET3)
M.2(SOCKET3)
Audio
Codec
DIGI+
VRM
LGA1700
Ethernet
PCIE
SATA
3.0 X4
X
6
5
1
2
4
12
9
7
11
8
13
5
4
3
10
7
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
The pin definitions in this chapter are for reference only. The pin names depend on the
location of the header/jumper/connector.
