1-10
This motherboard comes with two Double Data Rate 4 (DDR4) Small Outline Dual
Inline Memory Modules (SO-DIMM) sockets. The figure illustrates the location of
the DDR4 SO-DIMM sockets:
Installing a DIMM
3
To install a DIMM
To remove a DIMM
3
1.4
System memory
DIMM_A1*
DIMM_B1*
Channel
Sockets
Channel A
DIMM_A1*
Channel B
DIMM_B1*
•
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration.
Any excess memory from the higher-sized channel is then mapped for single-
channel operation.
•
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code
(D/C) from the same vendor. Check with the retailer to get the correct memory
modules.
• 11
th
Gen Intel
®
processors support 2933/2800/2666/2400/2133 natively.
• 10
th
Gen Intel
®
Core™ i7/i9 processors support 2933/2800/2666/2400/2133
natively, others will run at the maximum transfer rate of DDR4 2666.
•
The default memory operation frequency is dependent on its Serial Presence
Detect (SPD), which is the standard way of accessing information from a memory
module. Under the default state, some memory modules for overclocking may
operate at a lower frequency than the vendor-marked value.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs).
•
Refer to www.asus.com
for the latest Memory QVL (Qualified Vendors List).
Chapter 1: Product Introduction
Summary of Contents for PRIME H510TS
Page 1: ...Motherboard PRIME H510TS ...