Asus Prime H270-PRO Manual Download Page 34

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from 

digital apparatus set out in the Radio Interference Regulations of the Canadian Department 

of Communications.
This class B digital apparatus complies with Canadian ICES-003.

VCCI: Japan Compliance Statement
Class B ITE

KC: Korea Warning Statement

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of 

Chemicals) regulatory framework, we published the chemical substances in our products at 

ASUS REACH website at http://csr.asus.com/english/REACH.htm.

DO NOT throw the motherboard in municipal waste. This product has been designed to 

enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin 

indicates that the product (electrical and electronic equipment) should not be placed in 

municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol 

of the crossed out wheeled bin indicates that the battery should not be placed in municipal 

waste.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards 

for protecting our environment. We believe in providing solutions for you to be able to 

responsibly recycle our products, batteries, other components as well as the packaging 

materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling 

information in different regions.

Regional notice for California

WARNING:

 This product may contain chemicals known to the State of California to cause 

cancer, birth defects or other reproductive harm. Wash hands after handling.

A-2

Appendices

Summary of Contents for Prime H270-PRO






































Reviews: