1-2
Chapter 1: Product introduction
TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform
Module (TPM) system, which can securely store
keys, digital certificates, passwords and data. A
TPM system also helps enhance network security,
protects digital identities, and ensures platform
integrity.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
Correctly orient the ATX power supply plugs into these connectors and push
down firmly until the connectors completely fit.
•
For a fully configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later
version) and provides a minimum power of 350 W.
•
If you are uncertain about the minimum power supply requirement
for your system, refer to the Recommended Power Supply Wattage
Calculator at http://support.asus.com/PowerSupplyCalculator/
PSCalculator.aspx?SLanguage=en-us for details.
M.2 socket 3
This socket allows you to install an M.2 (NGFF) SSD module.
This socket supports M Key and
2242/2260/2280 storage devices.
Intel
®
LGA1151 CPU socket
Install Intel
®
LGA1151 CPU into this surface mount LGA1151 socket, which is
designed for 7th / 6th Generation Intel
®
Core™ i7 / i5 / i3, Pentium
®
, and Celeron
®
processors.
For more details, refer to
Central Processing Unit (CPU)
.
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN
connector supports a CPU fan of maximum 1A (12 W) fan power.
M.2(SOCKET3)
TPM
PIN 1
+3VSB
S_PCIRST#_TBD
GND
C_PCICLK_TPM
+3V
+3V
F_CLKRUN
F_SERIRQ
F_FRAME#
F_LAD3
F_LAD2
F_LAD1
F_LAD0
Summary of Contents for PRIME H110M-P
Page 1: ...Motherboard PRIME H110M P ...
