manualshive.com logo in svg

Asus POLO SiS630(E) Ultra-AGP, User Manual

Share
Download
Asus POLO SiS630(E) Ultra-AGP User Manual Download Page 27

ASUS POLO User’s Manual

27

3. HARDWARE SETUP

Connectors

3. H/W SETUP

6) Serial Port Connector (Teal/Turquoise 9-pin COM1)

One serial port is available for pointing devices or other serial devices. To enable
the port, see Onboard Serial Port 1 in 4.4.2 I/O Device Configuration.

COM 1

Serial Port (9-pin male)

7) VGA Connector (Blue 15-pin VGA)

This connector is for a VGA monitor and other VGA-compatible devices.

VGA Monitor (15-pin female)

8) Game/MIDI Connector (Gold 15-pin GAME_AUDIO)

This connector supports a joystick or a game pad for playing games, and MIDI
devices for playing or editing audio files.

9) Audio Connectors (Three 1/8” AUDIO)

The Line Out (lime) connects a headphone or speakers. The Line In (light blue)
connects a tape players or other audio sources. The Mic  (pink) connects a
microphone.

Mic

Line In

Line Out

1/8" Stereo Audio Connectors

Game/MIDI (15-pin female)

Summary of Contents for POLO SiS630(E) Ultra-AGP















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands