ASUS PIKE II 3008 Series
2-3
2.2
LSI Corporation MPT Setup Utility
The LSI Corporation MPT Setup Utility is an integrated RAID solution that allows you to
create the following RAID sets from SAS hard disk drives supported by the LSI SAS 3008
Series controller: RAID 0, RAID 1, RAID 1E, and RAID 10.
•
You may use disks of different sizes in one volume; however, the size of the smallest
disk determines the “logical” size of each member disk.
•
DO NOT combine Serial ATA and SAS disk drives in one volume.
•
The RAID setup screens shown in this section are for reference only and may not
exactly match the items on your screen due to the controller version difference.
•
The adapter name shown on the setup screens differs according to the installed SAS
RAID card.
MPTFW and MPTBIOS version of the SAS RAID card
Take note of the MPTFW and MPTBIOS version of your SAS RAID card. You will need it if
you request support from the ASUS Technical Support team.
You can get the MPTFW and MPTBIOS version of your SAS RAID card from the main screen
(the
Adapter List
screen) of the the SAS configuration utility.
MPTBIOS version
MPTFW version
