PE200S Series
57
3.12 Installing the Serial port module
(on selected models)
1. Align the bundled Serial port module with the Serial port holes and
screw holes on the rear panel.
2. Secure the Serial port module to the rear panel using two (2) bundled
hex screws.
3. Connect the Serial port module connector to the Serial port
connector on the motherboard.
NOTE: Please refer to the
Motherboard layout
section for the location of
the Serial port connectors.
4. To install another Serial port module, please repeat steps 1-3.
Summary of Contents for PE200S Series
