1
PA32U Firmware Update Procedures
When there is a newer version of firmware available on the ASUS website,
follow the procedures below to update your monitor. Make sure that the power
supply is stable and the USB drive is plugged in during the whole process.
1. Download and extract the latest firmware file to the root directory of a USB 2.0
drive. (File system: FAT32.) The monitor can only be upgraded using firmware file
named “PA32U.bin”.
2. Remove the USB cover and insert the USB drive into the
USB 2.0 A-type
port at
the back of the monitor.
3. Press both buttons above the power button simultaneously. The monitor will
begin the firmware update which takes about 25 seconds. If you have a power
failure during firmware update, the monitor will stop the process and turn off. After
power resumes, the monitor will continue the firmware update and reboot within 5
minutes. Contact your local service center if you encounter any problems.
Updating firmware.
Do not turn off power until the
finishing message appears.
Firmware update completed.
Please switch AC power on/off
once before using monitor.
4. After the firmware update completes, switch off the monitor using the power switch
on the back.
5. Turn on the monitor and reset all settings via the System Setup menu. The OSD
menu settings will be restored to factory defaults. Check the firmware version in the
System Setup > Information menu.
System Setup
Back
Language
DisplayPort Stream
Key Lock
Power Indicator
Ambient Effect
Information
All Reset
DisplayPort
3840x2160
HDR OFF
.
.
.
FW Version MCMxxx
ASUS PA32U
Standard Mode DisplayPort 3840 x 2160@
60Hz
English
