Asus P8Z68 DELUXE/GEN3 User Manual Download Page 87

Page: 87 / 148

ASUS P8Z68 DELUXE/GEN3

3-19

Chapter 3

[Disabled]

Disables the SATA function.

[Enhanced]

Set to [Enhanced] to support two SATA 6.0 Gb/s and two SATA 3.0 Gb/s

devices.

[Compatible]

Set to [Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four

SATA devices are supported under these operating systems.

Serial-ATA Controller 1 [Enhanced]

[Disabled]

Disables the SATA function.

[Enhanced]

Set to [Enhanced] to support 2 SATA 3Gb/s devices.

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When

read/write of your hard disk errors occur, this feature allows the hard disk to report warning

messages during the POST.

Configuration options: [Enabled] [Disabled]

Summary of Contents for P8Z68 DELUXE/GEN3





















































































































































Search results

Summary of Contents for P8Z68 DELUXE/GEN3

Reviews:

Asus P8Z68 DELUXE/GEN3, User Manual, Page: 87 / 148

Search results

Summary of Contents for P8Z68 DELUXE/GEN3

Reviews: