background image

1-25

Chapter 1: Product introduction

1.10 

Connectors

1.10.1 

Rear panel connectors

1. 

PS/2 Mouse port (green).

 This port is for a PS/2 mouse.

2. 

USB 2.0 ports 3 and 4

. These two 4-pin Universal Serial Bus (USB) ports are for USB 

2.0 devices.

3. 

LAN (RJ-45) port.

 This port allows Gigabit connection to a Local Area Network (LAN) 

through a network hub. Refer to the table below for the LAN port LED indications.

LAN port LED indications

LAN port

Speed 

LED

Activity Link 

LED

4. 

Center/Subwoofer port (orange).

 This port connects to the center/subwoofer 

speakers. 

5. 

Rear Speaker Out port (black).

 This port connects to the rear speakers in the  

4, 6, and 8-channel audio configurations.

6. 

Line In port (light blue).

 This port connects to the tape, CD, DVD player, or other 

audio sources.

7. 

Line Out port (lime).

 This port connects to a headphone or a speaker. In the 4, 6 and 

8-channel configurations, the function of this port becomes Front Speaker Out.

8. 

Microphone port (pink)

. This port connects to a microphone.

9. 

Side Speaker Out port (gray).

 This port connects to the side speakers in the  

8-channel audio configuration.

14

13

15

4 5 6 7

8

9

2

3

10

11

1

16 

12

Refer to the audio configuration table on the next page for the function of the audio ports in 

the 2, 4, 6, or 8-channel configuration.

Activity/Link LED                            Speed LED
Status

Description

Status

Description

OFF

No link

OFF

10Mbps connection

ORANGE

Linked

ORANGE

100Mbps connection

BLINKING

Data activity

GREEN

1Gbps connection

Summary of Contents for P8P67-M PRO



















































































Reviews: