Asus P8B-X User Manual Download Page 9

Page: 9 / 128

About this guide

This user guide contains the information you need when installing and configuring

the motherboard.

How this guide is organized

This user guide contains the following parts:

•

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technologies it supports.

•

Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to perform

when installing system components. It includes description of the switches,

jumpers, and connectors on the motherboard.

•

Chapter 3: Powering up

This chapter describes the power up sequence and ways of shutting down

the system.

•

Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS Setup

menus. Detailed descriptions of the BIOS parameters are also provided.

•

Chapter 5: RAID configuration

This chapter provides instructions for setting up, creating, and configuring

RAID sets using the available utilities.

•

Chapter 6: Driver installation

This chapter provides instructions for installing the necessary drivers for

different system components.

•

Appendix: Reference information

This appendix includes additional information that you may refer to when

configuring the motherboard.

Where to find more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

flyers, that may have been added by your dealer. These documents are not

part of the standard package.

Summary of Contents for P8B-X

































































































































Search results

Summary of Contents for P8B-X

Reviews:

Related manuals for P8B-X

Brands by name

Popular brands

Asus P8B-X, User Manual

Search results

Summary of Contents for P8B-X

Reviews:

Related manuals for P8B-X

Brands by name

Popular brands