Asus P7H55D-M PRO Page 55 User Manual Download

Page: 55 / 104

ASUS P7H55D-M PRO

3-1

3.1

Knowing BIOS

BIOS (Basic Input and Output System) stores system hardware settings such as storage

device configuration, overclocking settings, advanced power management, and boot device

configuration that are needed for system startup in the motherboard CMOS. In normal

circumstances, the default BIOS settings apply to most conditions to ensure optimum

performance.

We recommend that you not change the default BIOS settings

except in

the following circumstances:
• An error message appears on the screen during the system bootup and requests you to

run the BIOS Setup.

• You have installed a new system component that requires further BIOS settings or

update.

3.2

Updating BIOS

The ASUS website publishes the latest BIOS versions to provide enhancements on system

stability, compatibility, or performance. However, BIOS updating is potentially risky. If there

is no problem using the current version of BIOS,

DO NOT manually update the BIOS

Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the

instructions of this chapter to update your BIOS if necessary.

Visit the ASUS website at www.asus.com to download the latest BIOS file for this

motherboard.

The following utilities allow you to manage and update the motherboard BIOS setup program.
1.

ASUS Update:

Updates the BIOS in Windows

environment.

ASUS EZ Flash 2:

Updates the BIOS using a USB flash disk.

ASUS CrashFree BIOS 3 utility:

Restores the BIOS using the motherboard support

DVD or a USB flash drive when the BIOS file fails or gets corrupted.

ASUS BIOS Updater:

Updates and backups the BIOS in DOS environment using the

motherboard support DVD and a USB flash disk drive.

Refer to the corresponding sections for details on these utilities.

Save a copy of the original motherboard BIOS file to a USB flash drive in case you need

to restore the BIOS in the future. Copy the original motherboard BIOS using the

ASUS

Update

utility.

Inappropriate settings of the BIOS may result to instability or failure to boot.

We strongly

recommend that you change the BIOS settings only with the help of a trained service

personnel

Chapter 3:

BIOS setup

Chapter 3

Summary of Contents for P7H55D-M PRO









































































































Search results

Summary of Contents for P7H55D-M PRO

Reviews:

Related manuals for P7H55D-M PRO

Brands by name

Popular brands

Asus P7H55D-M PRO, User Manual

Search results

Summary of Contents for P7H55D-M PRO

Reviews:

Related manuals for P7H55D-M PRO

Brands by name

Popular brands