Asus P7H55 series User Manual Download Page 40

Page: 40 / 66

2-2

ASUS P7H55

2.1.2

ASUS EZ Flash 2

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based

utility.

Before you start using this utility, download the latest BIOS file from the ASUS website at

www.asus.com.

To update the BIOS using EZ Flash 2:

Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch

EZ Flash 2 in any of these two ways:

•

Press

<Alt> + <F2>

during POST.

•

Enter the BIOS setup program. Go to the

Tools

menu to select

EZ Flash 2

and

press

<Enter>

to enable it.

Press

<Tab>

to switch between drives until the correct BIOS file is found.

When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process

and automatically reboots the system when done.

The ASUS Update utility is capable of updating itself through the Internet. Always update

the utility to avail all its features.

Updating from a BIOS file

a. Select

Update BIOS from a file

, then click

Next

b. Locate the BIOS file from the

Open

window, then click

Open

Follow the onscreen instructions to complete the updating process.

ASUSTek EZ Flash 2 BIOS ROM Utility V4.12

Current ROM

Update ROM

Note

FLASH TYPE:

MXIC 25L1605A

PATH:

A:\

BOARD:

P7H55

VER:

0302 (H:00 B:01)

DATE:

12/28/2009

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [ESC] Exit

• This function supports USB flash disks with

FAT 32/16

format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent system boot

failure!

Summary of Contents for P7H55 series



































































Search results

Summary of Contents for P7H55 series

Reviews:

Related manuals for P7H55 series

Brands by name

Popular brands

Asus P7H55 series, User Manual

Search results

Summary of Contents for P7H55 series

Reviews:

Related manuals for P7H55 series

Brands by name

Popular brands