3-4
Chapter 3: BIOS setup
Chapter 3
3.2.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS from the ASUS website at www.
asus.com.
To update the BIOS using EZ Flash 2
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port, and then
launch EZ Flash 2 in any of these two ways:
•
Press <Alt> + <F2> during POST.
•
Enter the BIOS setup program. Go to the
Tools
menu to select
EZ Flash 2
and
press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
ASUSTek EZ Flash 2 BIOS ROM Utility V4.10
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
P7H55PRO.ROM 2097152 2009-08-06 17:30:48
FLASH TYPE:
WINBOND 25X/Q64
PATH:
A:\
BOARD:
P7H55-M PRO
VER:
0113
DATE:
11/03/2009
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
2.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
•
Only a USB flash disk with FAT 32/16 format and single partition can support the
ASUS EZ Flash 2 utility.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the
Load Setup Defaults
item under the
Exit
menu. Refer to section
3.10 Exit Menu
for
details.
Summary of Contents for P7H55 DVI
