Asus P5QL Manual Download Page 14

Page: 14 / 112

1-2

Chapter 1: Product introduction

1.1

Welcome!

Thank you for buying an ASUS

P5QL-EM motherboard!

The motherboard delivers a host of new features and latest technologies, making it

another standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the

items in your package with the list below.

1.2

Package contents

Check your motherboard package for the following items.
Motherboard

ASUS P5QL-EM motherboard

Cables

2 x Serial ATA cables

1 x 2 in 1 Serial ATA power cable

1 x Ultra DMA 133 / 100 cable

1 x Floppy disk drive cable

Accessories

I/O shield

Application DVD

ASUS motherboard support DVD

Documentation

User guide

If any of the above items is damaged or missing, contact your retailer.

1.3

Special features

1.3.1

Product highlights

Green ASUS

This motherboard and its packaging comply with the European Union’s Restriction

on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision

of creating environment-friendly and recyclable products/packaging to safeguard

consumers’ health while minimizing the impact on the environment.

LGA775 Intel

Core™2 and Quad-core Processor Ready

This motherboard supports the latest Intel

Core™2 processors in LGA775

package. It also can support Intel

next generation 45nm Multi-Core CPU. With

new Intel

Core™ microarchitecture technology and 1333/1066/800 MHz FSB,

Intel

Core™2 processor is one of the most powerful and efficient CPU in the

world.

Summary of Contents for P5QL

















































































































Search results

Summary of Contents for P5QL

Reviews:

Related manuals for P5QL

Brands by name

Popular brands

Asus P5QL, Manual

Search results

Summary of Contents for P5QL

Reviews:

Related manuals for P5QL

Brands by name

Popular brands