3.
USB connectors (10-1 pin USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with the USB 2.0 specification that supports up
to 480Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
P5QL-VM DO
P5QL-VM DO USB2.0 connectors
PIN 1
USB+5V
USB_P10-
GND
NC
USB+5
V
USB_P9
-
USB_P9
+
GND
USB910
PIN 1
USB+5V
USB_P8
-
USB_P8
+
GND
NC
USB+5
V
USB_P7
-
USB_P7
+
GND
USB78
4.
CPU, Chassis, and Power fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN, 3-pin
PWR_FAN)
The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W max.) or a total
of 1 A ~ 7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches the ground pin of
the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. They are not jumpers! DO NOT
place jumper caps on the fan connectors.
CPU_FAN
CPU
FA
N PW
M
CPU
FA
N IN
CPU
FA
N PWR
GND
P5QL-VM DO
P5QL-VM DO fan connectors
PWR_FAN
GND
+12V
Rotation
Rotation
+12V
GND
CHA_FAN
Only the CPU fan supports the ASUS Q-FAN feature.
1-13
ASUS P5QL-VM DO
Summary of Contents for P5QL-VM - DO/CSM Micro ATX Motherboard
Page 1: ...Motherboard P5QL VM DO ...
