Asus P5Q3 Deluxe WiFi-AP n User Manual Download Page 15

Page: 15 / 64

ASUS P5Q3 Deluxe/WiFi-AP@n

1-1

1.1

Welcome!

Thank you for buying an ASUS

P5Q3 Deluxe/WiFi-AP@n motherboard!

The motherboard delivers a host of new features and latest technologies, making it

another standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the

items in your package with the list below.

If any of the above items is damaged or missing, contact your retailer.

1.2

Package contents

Check your motherboard package for the following items.

Motherboard

ASUS P5Q3 Deluxe/WiFi-AP@n

I/O modules

1 x Multi-function module (1-port IEEE 1394a and

2-port USB 2.0 module)

Cables

1 x Serial ATA power cable for 2 devices

6 x Serial ATA signal cables

1 x Ultra DMA 133/100/66 cable

1 x Floppy disk drive cable

Accessories

ASUS Q-Shield (I/O shield)

1 x ASUS Optional Fans for Water-Cooling or

Passive-Cooling only

1 x ASUS Q-Connector Kit (USB, 1394, system

panel; Retail version only)

2 x WiFi-AP@n omni-directional antennae

Application DVD

ASUS motherboard support DVD

Documentation

User guide

ASUS WiFi-AP@n manual

Summary of Contents for P5Q3 Deluxe WiFi-AP n

































































Search results

Summary of Contents for P5Q3 Deluxe WiFi-AP n

Reviews:

Related manuals for P5Q3 Deluxe WiFi-AP n

Brands by name

Popular brands

Asus P5Q3 Deluxe WiFi-AP n, User Manual

Search results

Summary of Contents for P5Q3 Deluxe WiFi-AP n

Reviews:

Related manuals for P5Q3 Deluxe WiFi-AP n

Brands by name

Popular brands