Asus P5Q Premium - Motherboard - ATX User Manual Download Page 108

Page: 108 / 196

3-36

Chapter 3: BIOS setup

3.7.2

Boot Settings Configuration

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while

booting to decrease the time needed to boot the system. When set to [Disabled],

BIOS performs all the POST items.

Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.

Configuration options: [Disabled] [Enabled]

Set this item to [Enabled] to use the ASUS MyLogo2™ feature.

AddOn ROM Display Mode [Force BIOS]

Sets the display mode for option ROM.

Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [Off] [On]

Wait for ‘F1’ If Error [Enabled]

When set to [Enabled], the system waits for the <F1> key to be pressed when error

occurs.

Configuration options: [Disabled] [Enabled]

Hit ‘DEL’ Message Display [Enabled]

When set to [Enabled], the system displays the message “Press DEL to run Setup”

during POST.

Configuration options: [Disabled] [Enabled]

Select Screen

Select Item

Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Boot Settings Configuration

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

AddOn ROM Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

Wait for ‘F1’ if Error

[Enabled]

Hit ‘DEL’ Message Display [Enabled]

Allows BIOS to skip

certain tests while

booting. This will

decrease the time

needed to boot the

system.

BIOS SETUP UTILITY

Boot

Summary of Contents for P5Q Premium - Motherboard - ATX





































































































































































































Search results

Summary of Contents for P5Q Premium - Motherboard - ATX

Reviews:

Asus P5Q Premium - Motherboard - ATX, User Manual, Page: 108 / 196

Search results

Summary of Contents for P5Q Premium - Motherboard - ATX

Reviews: